Welcome To Dongguan Baojia Packaging Machinery Co., Ltd. !


Service Hotline:

Location: Home >News >News

News News and information

Production procedure of film blowing machine Date:【2020-07-15】 Read【222】Times 【Print】 【Back

1). Workers should check their own clothing before handling the machine, and handle places such as cuffs and clothing corners to avoid being caught in the rotating part of the machine and causing safety accidents. You must wear a work hat when you are on the machine, and you are not allowed to wear chemical fiber clothing;

2), clean up the debris on the equipment such as tools, grease guns, miscellaneous cloth, etc. before starting to avoid accidents;

3). There must be no less than two operators on site during startup. Only after confirming that no one is in a dangerous position before starting up, can the machine be started up;

4) When the machine is running, it is forbidden to touch the rotating parts by hand to avoid accidents. If it is necessary to contact, it should work in the direction of operation and at least one person should be on guard;

5). When the equipment emits abnormal sound or malfunctions during operation, it should immediately stop and notify the equipment department for processing;

 6). The network must be shut down when changing the network. The network can only be changed after the pressure drops 1 to 2 minutes after the shutdown;

7), the die head is not allowed to collide with iron, it should be placed gently and cushioned with a soft cloth underneath;

8). Adjust the setting value of the temperature control table of each zone and section according to the process requirements, and correct it with a glass thermometer after heating. When heating, the head should be heated first, and then the other sections. The thermal insulation time of the machine head is more than 1 hour, and the thermal insulation time of other sections is more than 20 minutes;

Copyright © Dongguan Baojia Packaging Machinery Co., Ltd. All Rights Reserved 粤ICP备19137680号